We have created this page in english for international compliance.

The Junior IOT Magicbit portfolio

Contents –
Brief Description of each product

Product: Junior IOT Magicbit Tiny (available 2025)
Product: Junior IOT Magicbit Tiny STEM Kit (available 2024)
Product: Junior IOT Magicbit Learner (available 2024)
Product: Junior IOT Magicbit Pro (available 2025)
Product: Junior IOT Magicbit Explorer (available 2025)
Product: Junior IOT Magicbit Master (available 2025)

Why this page
Commisioning the factory to add the Junior IOT label
Confirm our authority for the Junior IOT brandname
Valid shipments – Commisioning the manufacturer to import our products
Import documents to be included with the shipment
Manufacturer product CE certification for the EU market
Details of conformity assessment procedure by manufacturer
EU declaration of conformity, drafted and signed by the manufacturer
Confirmed CE compliance to allow application of the CE mark
Application details for the CE mark on the product
Providing support in the EU market
User guide

In the journey of Junior IOT we have used many different types of programmable devices. We have posted many examples on our website.

One of our earlier publications is found here: https://junioriot.nl/ttn-balloons-up/
For each of our projects and goals, we found an Arduino type board that fits our needs. In 2016 we started using the Arduino Pro Micro in our GPS balloon tracker set. Starting in 2017, we have been using our typical red Arduino Nano Atmega 168 with the handy micro USB in our educational projects. In 2018 we started using the Lora32u4 in our Lora projects. After some realy cool experiments with the earliest ESP32 boards, we introduced the Lolin32 into our projects in 2019. The last few years we have seen many new iterations and products – however most did not bring us the ‘right’ options in combination with our desired classic raw experience. That is, until now.

With the Junior IOT Magicbit, we are able to introduce all the new features and options:

• A perfect match with the typical Junior IOT look-and-feel: you can touch and recognize all the industry-standard components
• We love the lay-out of thecomponents and we really, really love the design and the color
• On-board features: buttons, switches, potmeter, graphic display, speaker, microphone, motor controllers
• Board expansion: expansion ports for motors, sensors, robotics, interactivity
• ESP32 features: WiFi, bluetooth, mesh networking and more
• Programming: on-board games and programming, plus programming in block-style, C Arduino style, micro-python and many more
• Many more compelling new features …

With the Junior IOT Magicbit, we now have found the ideal setup for our learners. This gives our users the best experience – compact and robust for a school environment, complete yet simple to use for our audience, while still appealing to the desires of a professional hobbyist.

Having found our perfect components, we have decided to ask the manufacturer to add our name to the product: The Junior IOT Magicbit. It comes in two sizes: Tiny and Core, each woth their own variations.

 

 

Brief description of each product

The description in this chapter helps to identify the product:

• Magicbit tiny / magicbit core / magicbit tiny kit / magicbit tiny stem kit / magicbit learner / magicbit pro / magicbit explorer / magicbit master

The Junior IOT Magicbit Tiny Product Portfolio overview

(Magicbit Tiny with functions)

Product: Junior IOT Magicbit Tiny (available 2025)

Contents and functions

• Junior IOT Magicbit Tiny Development Board
  • 2 x Pushbuttons
  • 1 x Potentiometer
  • 4 x LED
  • 2 x Motor driver
  • 1 x LDR
  • 1 x RGB LED
  • 1 x Buzzer
  • 2 x IR modules
• 1 x Micro USB Cable

Programmability

• Arduino
• Scratch

 

 

 

Product: Junior IOT Magicbit Tiny STEM Kit (available 2024)

Contents and functions

• Junior IOT Magicbit Tiny Development Board
  • 2 x Pushbuttons
  • 1 x Potentiometer
  • 4 x LED
  • 2 x Motor driver
  • 1 x LDR
  • 1 x RGB LED
  • 1 x Buzzer
  • 2 x IR modules
• 1 x Module connector for Magicbit Tiny
• 1 x Ultrasonic sensor
• 1 x Ultrasonic cable
• 1 x Servo Motor
• 2 x DC motor
• 2 x Plastic wheel
• 1 x Castor Wheel
• Robot car chassis
• Servo motor projects platform
• 1 x Micro USB cable
• 1 x AA battery holder
•  Nuts and bolts

Programmability

• Arduino
• Scratch

 

 

The Junior IOT Magicbit Core Product Portfolio overview

(Magicbit Core with functions)

Product: Junior IOT Magicbit Learner (available 2024)

Contents and functions

• Junior IOT Magicbit Core development board
  • 2 x Pushbutton
  • 1 x Potentiometer
  • 4 x LED
  • 2 x Motor driver
  • 1 x LDR
  • 1 x Buzzer
  • 2 x IR module
  • 1 x OLED Display
  • 1 x Battery connector
• 1 x Micro USB cable
• 1 x Plastic Fan blade
• 1 x DC motor
• 1 x AA Battery holder
• 2 x 10K resistor
• 1 x LED
• 10 x M-M and M-F jumper wires
• 1 x Proximity sensor module

Programmability

• Arduino
• Scratch
• MicroPython
• Magicblocks (IoT platform)

 

 

Product: Junior IOT Magicbit Pro (available 2025)

Contents and functions

• Junior IOT Magicbit Core development board
  • 2 x Pushbutton
  • 1 x Potentiometer
  • 4 x LED
  • 2 x Motor driver
  • 1 x LDR
  • 1 x Buzzer
  • 2 x IR module
  • 1 x OLED Display
  • 1 x Battery connector
• 1 x Micro USB cable
• 10 pluggable Sensor Modules
  • 1 x Proximity sensor module
  • 1 x IR module
  • 1 x Servo Motor
  • 1 x Ultrasonic sensor
  • 1 x Tilt module
  • 1 x DHT11 module
  • 1 x RGB Module
  • 2 x Module connector
  • 1 x Soil moisture sensor
  • 1 x Motion module
• Battery holder
• Jumper Wires

Programmability

• Arduino
• Scratch
• MicroPython
• Magicblocks (IoT platform)

 

Product: Junior IOT Magicbit Explorer (available 2025)

Contents and functions

• Junior IOT Magicbit Core development board
  • 2 x Pushbutton
  • 1 x Potentiometer
  • 4 x LED
  • 2 x Motor driver
  • 1 x LDR
  • 1 x Buzzer
  • 2 x IR module
  • 1 x OLED Display
  • 1 x Battery connector
  • 1 x Micro USB cable
• Magicbot Robotics platform
  • 1 x ultrasonic sensor
  • 5 x Line tracking (IR) sensor
  • 1 x castor wheel
  • 1 x Battery Holder
  • 2 x N2O gear motor
  • 2 x Plastic wheel
  • 1 x Switch

Programmability

• Arduino
• Scratch
• MicroPython
• Magicblocks (IoT platform)

 

 

 

Product: Junior IOT Magicbit Master (available 2025)

Contents and functions

• Junior IOT Magicbit Core development board
  • 2 x Pushbutton
  • 1 x Potentiometer
  • 4 x LED
  • 2 x Motor driver
  • 1 x LDR
  • 1 x Buzzer
  • 2 x IR module
  • 1 x OLED Display
  • 1 x Battery connector
• 1 x Micro USB cable
• 10 pluggable Sensor Modules
  • 1 x Proximity sensor module
  • 1 x IR module
  • 1 x Servo Motor
  • 1 x Ultrasonic sensor
  • 1 x Tilt module
  • 1 x DHT11 module
  • 1 x RGB Module
  • 2 x Module connector
  • 1 x Soil moisture sensor
  • 1 x Motion module
• Magicbot Robotics platform
  • 1 x ultrasonic sensor
  • 5 x Line tracking (IR) sensors
  • 1 x castor wheel
  • 1 x Battery Holder
  • 2 x N2O gear motors
  • 2 x Plastic wheels
  • 1 x Switch

Programmability

• Arduino
• Scratch
• MicroPython
• Magicblocks (IoT platform)

 

Learning Kit

The learning Kit selection exists of one of more of the Magicbit packages.

 

 

Why this page?

EU regulations explain how any product import into the EU needs to be supported by a set of information to honor the needs of consumers within the EU. Official rules help the EU import officials in approving the shipments into the EU. This current page is created to answer to these official needs. With completing these actions we are now the official importer of the product.

To be able to use the products in our educatonal projects and in projects of our customers, we will need to demonstrate CE compliance to be able to succesfully ship the product from supplier to our own address. This page presents any EU official with the official information and documentation relevant to allowing the product onto the EU market. Additionally, this page provides you as a customer with the product information to safely use the product.

Commisioning the factory to add the Junior IOT label

The factory is able to add our brandname to the product to confirm our recognition of this product. We found it is needed to officially confirm our authority to commision the brandname, in order to satisfy specific inquiries from EU import officials. We will do so in the next few paragraphs.

(the picture displays a test version – need to add product code, CE mark and Junior IOT link)

 

x

 

(picture of design of CE marking and Junior IOT details on actual PCB)

Confirm our authority for the Junior IOT brandname

EU regulations clarify that imported goods should carry the correct brandname to prevent EU customers from counterfeit goods. For some goods, we have indeed received this request from import officials, asking to provide proof of authorization to the factory to use the Junior IOT label. In this section we demonstrate our history and ownership of the brandname.

The Junior IOT name came to life in 2016, when we started our first project in dec 2016, preparing for our 2017 Balloons Up challenge. The Junior IOT name was created for our projects. Read more at: http://junioriotchallenge.nl/

• In 2019 we have registered our foundation (dutch: Stichting) as Stichting Junior IOT to handle operations in our makerspaces and in educational events. Details and founding documents are available on our website https://junioriot.nl/stichting/
• In 2023 we have registered the organization section Junior IOT Onderwijs BV to handle operations in our educational projects in schools. Details and official documents are available on our website https://junioriot.nl/junior-iot-onderwijs-bv/

Both entities are fully approved to use the Junior IOT brandname.

To help in authorizing the shipments, this page certifies three addresses in Alkmaar. First our postal address, next is our shipping address. Both are valid for items carrying the ‘Junior IOT’ logo. You can find our registered postal addresses in these founding documents for the foundation: Cabeljaustraat 9, 1815GD  in Alkmaar, and for Junior IOT Onderwijs BV: Hornwaard 34, 1824 SE Alkmaar. Additionally, the registration at the Chamber of Commerce (in dutch: Kamer van Koophandel or KvK) confirms Junior IOT as our brandname and again confirms how this is connected to our postal addresses. The official extract is called ‘Uittreksel Kamer van Koophandel’ and can be found here for the foundation:   https://junioriot.nl/app/uploads/2000/12/uittreksel_handelsregister_75357984.pdf
and here for Junior IOT Onderwijs BV:  https://junioriot.nl/app/uploads/2023/03/KVK_Recherche_89566866_15_03_2023_16-47-09.pdf
Starting 2024 we have selected our office location for receiving larger shipments in Alkmaar: Bannewaard 164, 1824 EG Alkmaar. Each of the three mentioned addresses are valid:

• Cabeljaustraat 9, 1815GD  in Alkmaar
• Hornwaard 34, 1824 SE Alkmaar
• Bannewaard 164, 1824 EG Alkmaar

Furthermore, if more confirmation is needed, the Junior IOT domain name is registered at amazon, and replicated for loadbalancing at cloudflare, including the dutch and international variations. For your confirmation, we have published our authenticity details in a TXT record as a public viewable proof of authority. Please use your preferred online viewer e.g.: https://mxtoolbox.com/SuperTool.aspx?action=txt%3ajunioriot.nl&run=toolpage or https://dnslookup.online/txt.html

This will allow you to review our DNS key in our domain registration, to confirm our authority and ownership of the brandname Junior IOT, connecting the details to our address. The public information should read:

“Stichting Junior IOT, in Alkmaar and Junior IOT Onderwijs BV, Hornwaard 34 in Alkmaar are the owners of the brand name Junior IOT. KvK registration numbers 75357984 and 89566866 are registered in the Netherlands on july 11, 2019 and march 15, 2023.”

The above statements confirm our ownership of the brandname ‘Junior IOT’ and our authority to commission the use of the name Junior IOT. For further questions, please contact us at [email protected].

Valid shipments – Commisioning the manufacturer to import our products for the Junior IOT label

With our ownership of the ‘Junior IOT’ brandname confirmed, we are authorized to commision the ‘Junior IOT’ branded products to officially display our connection with these products. We have commissioned the manufacturer to make the branded version of the products as detailed on this page. Pictured here is the factory test batch for the customized version. Please be aware that type number and product link have been added to the finalized design to satisfy EU market needs.

 

x

 

(insert picture with branded test product)

For import officials to confirm that the shipment is authorized to use ‘Junior IOT’ brand label we provide the following authorization information:

Junior IOT authorizes any shipments with ‘Junior IOT’ branded materials as valid and authorized bij Junior IOT for the EU market if the following is satisfied:

• • Materials are branded ‘Junior IOT’.
  • Shipment and/or invoice is addressed to Junior IOT, Alkmaar, the Netherlands.

For any other shipments, please contact us at [email protected]

 

Import documents to be included with the shipment

Furthermore to satisfy import requirements towards EU officials, the shipment must contain two documents:

• Commercial invoice. This mentions the product and can mention the formalized HS product code.
• Freight letter, which details contents of the box, the shipper, the receiving party, and who paid for the shipment.

The HS code for EU import is found via this link: https://eservices.minfin.fgov.be/extTariffBrowser/browseNomen.xhtml?trade=0&cnCode=85423100&suffix=80&country=&lang=NL&page=1&date=20240712

• HS Code Examples
  • Demonstration and education –
    • HS 90230010 – Instruments, apparatus and models, designed for demonstrational purposes (for example, in education or exhibitions), unsuitable for other uses. Of a type used for teaching physics, chemistry or technical subjects.
    • HS 90230080 – Instruments, apparatus and models designed for demonstrational purposes, e.g. in education or exhibitions, unsuitable for other uses (excl. ground flying trainers of heading 8805, collectors’ pieces of heading 9705, antiques of an age > 100 years of heading 9706 and of the type used for teaching physics, chemistry and technical subjects)
  • Arduino completed boards – HS code 8542 31 90 00; details: https://eservices.minfin.fgov.be/extTariffBrowser/Measure?cnCode=8542319000&country=&date=20240712&lang=NL&page=1&trade=0
  • soldering irons – HS code for import: 8515 11 00 00
  • misc other electronic parts, HS code is 8543 70 90 99
  • Led licht machines, as parts and components, 8539 90 90 00
• For our product, the description is: Junior IOT ….

EORI number for Junior IOT

As of januari 2023, the Economic Operator Registration and Identification number, EORI number of Junior IOT needs to be visually mentioned in the shipping form and in the commercial invoice. If there is no field for this in your shipping label generator, it is suggested to enter this in the field for the Junior IOT VAT/Tax number or to mention this as part of the Junior IOT name/address.

• For Junior IOT Onderwijs BV, EORI nummer: NL865023694 (registered aug 2024)

Manufacturer product CE certification for the EU market

For electronic devices available on the EU market, the relevant CE certifications and approvals need to be readily available. This section presents the official certifications and documents as supplied by the manufacturer.

To be updated: documentation needs to be presented to deminstrate the exemption or certification of the products concernint

• • Safety (LVD – Low Voltage Directive).The LVD which is a safety directive applies to all electrical equipment designed for use with a voltage rating of between 50 and 1000 V AC and between 75 and 1500 V DC. The lower voltage limits are removed for wireless devices, which essentially means every wireless device sold into Europe, even if it’s a tiny 5V DC, 1 mW Bluetooth transmitter, needs to be tested for safety. However, even if the LVD is not applicable to your product, the EU rules clearly state that a product must be still be ‘safe’.For this we review the document https://www.zvei.org/fileadmin/user_upload/Presse_und_Medien/Publikationen/2013/maerz/Role_of_CE_marking_in_the_placing_on_the_market_of_electronic_components/Position-CE-Components-2013-EN.pdf

      Low Voltage Directive 2006/95/EC The Low Voltage Directive (LVD) governs the safety of ‘electrical equipment’ with a voltage between 50 and 1000 V for alternating current and between 75 and 1500 V for direct current, according to its Article 1. The operational voltage of many electronic components lies outside this range. Therefore, such components do not fall under the scope of the Low Voltage Directive.

  • EMC Directive. The EMC directive applies to almost all electronic equipment (unintentional radiating devices). It covers the radiated and conducted emissions performance of electronic products as well as the radiated and conducted immunity performance.
  • Radio Equipment Directive (RED) as of June 2016. Applies to all radio equipment and to telecommunications terminal equipment intended to be connected to public telecommunications networks. It covers the radio characteristics and frequency allocation of wireless transmitters in Europe. A point to note is that if your equipment falls under the RED directive, then different EMC standards are usually called out instead of those used for unintentional radiating devices which fall under the EMC directive. This is because the standards for wireless transmitters in Europe also cover emissions and immunity performance specifically for transmitters.
  • RoHS. An often overlooked aspect of CE compliance is the RoHS directive. This directive governs the maximum concentrations of hazardous substances contained within products. A new version of this directive came out in 2013 which now requires most electronic equipment to be compliant with the rules. If you want to be in compliance with the rules, make sure that your components and manufacturing processes comply with the RoHS requirements.
  • WEEE.The WEEE Directive (Waste from Electrical and Electronic Equipment Directive) is now applicable to most electronic and electrical equipment in Europe. It’s aimed at redirecting waste electronic and electrical equipment from the landfill to a recycle depot instead.

 

 

EMC, Electro Magnetic Certification. The product has been tested to comply to the EMC directive. The certificate is available as PDF (document: … link to download …..) and is available on the validator website (link:  .. link to document at supplier … ). The certificate is transcribed as follows:

Click to see details

(transcribed tekst)

LVD, Low Voltage Directive. The product has been tested to comply with the LVD directive. The certificate is available as PDF (document:  … link to download …) and is also available at the validator website (link:  … link …. ). The certificate is transcribed:

Click to see details

(transcribed tekst)

x
(demonstrate more proof here) 

Conclusion: The factory has provided the EMC and LVD certificates for the product, which confirm the CE certification for the product and confirms the CE logo can be applied to demonstrate compliance.

The certificates as presented above confirm CE compliance. Also the certificates confirm that the use of the CE marking is applicable.

 

Details of conformity assessment procedure by manufacturer

This document presents a statement of the conformity assessment procedure that has been followed.

–> represented by the following document

EU declaration of conformity, drafted and signed by the manufacturer

The statement to confirm the product is in conformity with the EU directives and regulations is presented in this document. For this, the EU declaration of conformity is drafted and signed by the manufacturer. This is a mandatory document that the manufacturer or authorised representative signs to declare that your products comply with the EU requirements. By signing the DoC the manufacturer or representative takes full responsibility for the product’s compliance with the applicable EU law.

The declaration as created by the manufacturer is available as PDF (link: … download link ….)    … if pdf is not signed: …. and the signed version is available as JPEG
(image)

Click to see details

x

(transcribed)

The declaration as presented above confirms conformity to the EU regulations, to allow the product on the EU market.

Confirmed CE compliance to allow application of the CE mark

To confirm CE compliance to both the import officials and the end user, the CE marking needs to be displayed on the product. Specific rules tell us how this has to be done. The EU regulations are described in this link: https://europa.eu/youreurope/business/product-requirements/labels-markings/ce-marking/index_en.htm#:~:text=The%20CE%20marking%20must%20be%20visible%2C%20legible%20and%20indelible.,in%20the%20relevant%20product%20requirements).

In our situation we need to check the rules concerning the manufacturer, see https://ec.europa.eu/growth/single-market/ce-marking/manufacturers_en

These regulations explain that we need to have the following available for any CE marked product on the EU market:

• Conformity with all relevant EU-wide requirements –> completed: the EMC and LVD results are available as detailed above.
• Technical documentation availability to market surveillance authorities –> see details at https://europa.eu/youreurope/business/product-requirements/compliance/technical-documentation-conformity/index_en.htm  –> this all is now available on this webpage.

Application details for the CE mark on the product

As our product is confirmed to be compliant and is sufficiently documented, the CE mark can be applied. Logo height is at least 5 mm. The image files for the logo are available at https://ec.europa.eu/growth/single-market/ce-marking_en. We have selected this official png file:

Also, the product needs to display the applicable identification. In our case this is the model number and name as displayed on the manufacturer documentation and certifications. On the product we display the following information:

• Logo: Junior IOT
• CE marking
• Junior IOT has decided to print one of the following or both:
  • Model Number: magicbit tiny / magicbit core / magicbit tiny kit / magicbit tiny stem kit / magicbit learner / magicbit pro / magicbit explorer / magicbit master
  • link: JuniorIOT.nl/magicbit

Example:

(image to be updated)

Providing support in the EU market

EU regulations require us to present a point of contact to be available for users within the EU.

(….name…) is the manufacturer, and is the contact for conformity details and product quality. (….other name…) is the trading contact Sri Lanka for any further inquiries concerning the manufacturer. Junior IOT is the Authorized Contact and the Importer for the ‘Junior IOT’ branded version as described, and is the contact point to present official documentation to EU officials.

Please be aware that the support as described on this page is limited to only this version marked ‘Junior IOT’ and only to products purchased at, or sold by Junior IOT in the Netherlands and in other parts of the EU. Many similar products could exist in the market, which are specifically excluded from our support.

 

Product: Junior IOT magicbit tiny / magicbit core / magicbit tiny kit / magicbit learner / magicbit pro / magicbit explorer / magicbit master
Specification: Only those versions clearly marked ‘Junior IOT’

EU contact details, Junior IOT label owner and authorised representative:

Junior IOT Onderwijs BV, Marco van Schagen
Cabeljaustraat 9, 1815 DG Alkmaar, the Netherlands
website: junioriot.nl
email: [email protected]

Role: import, sales and documentation support contact, in this context limited to items marked ‘Junior IOT’ and purchased or sold by Junior IOT in the Netherlands

Manufacturing partner in Sri Lanka:

Designed & Manufactured by
MAGICBITS (PVT) LTD
258/3, Galvihara Road, Dehiwala,
Sri Lanka.
Tel: +94 764641100
Email: [email protected]

Official company government document confirms official business details: 0-Certificate of Incorpration

Roles:

• • Sales: Purchasing, shipping contact and additional point of contact towards manufacturer, in this context limited to items marked ‘Junior IOT’ and purchased or sold by Junior IOT in the Netherlands.
  • Manufacturer: Manufacturing, testing and certification, responsible for products compliance with applicable EU law; in this context limited to items marked ‘Junior IOT’ and purchased or sold by Junior IOT in the Netherlands.

Click to see details

• • Image
  • Business licence, original text:

ආකෘති 20
FORM 2A

ශ්‍රී ලංකා ප්‍රජාතාන්ත්‍රික සමාජවාදී ජන රජය
இலங்கை ஜனநாயக சோசலிச குடியரசு
Democratic Socialist Republic of Sri Lanka
Company Nurnber  P  V  00214585

2007 අංක 7 දරණ සමාගම් පත
2007 ஆம் ஆண்டிஇலக்கக் கம்பனிகள் சட்டம்
The Companies Act No 7 of 2007

පෞද්ගලික සමාගම සංස්ථාගත කිරීමේ සහතිකය
தனியார் கம்பனி கூட்டிணைப்புச் சான்றிதழ்
Certificate of Incorporation of a Private Company
5 日 ໙໖໐ ໘ ໙ 5 Lag, Pursuant to Section 5.

මැජික් බිට්ස් (පිවිටී) එල් ටීඩී

2007 අංක 7 දරණ සමාගම් පනත යටතේ අවශ්‍යතා සපුරා ඇති බැවින් පෞද්ගලික සමාගමක් වශයෙන් අද දින සංස්ථාගත කළ බවත්, එකී සමාගම සීමා සහිත බවත් මෙයින් සහතික කරමි. දෙදහස් දහ නමයක් වූ අගෝස්තු මස පහළොස් වන මෙදින කොළඹදී අත්සන්කොට දුනිමි.

மஜிக்பிட்ஸ் (பீவிடீ) எல்டீடி

இலக்க கம்பலிகள் சட்டத்தின் கீழான எல்லாத் தேவைப்பாடுகளும் இணங்கியொழுக்கப்பட்டு இத்  2007 ஆம் ஆண்டின்
திகதியன்று தனியார் கம்பனியாக கூட்டிணைக்கப்பட்டுள்ளது என்றும் அக்கம்பனி உரையறுக்கப்பட்டதென்றும் நான் இத்தால்
சான்றளிக்கிறேன்.

இரண்டாயிரத்து பத்தொன்பது ஆம் ஆண்டு ஆகஸ்ட் மாதம் பதினைந்தாம் திகதியன்று கொழுப்பில் என்னால் கைச்சாத்திட்டுக் கொடுக்கப்பட்டது.

I hereby certify that

MAGICBITS (PVT) LTD

On this day has been incorporated as a Private Company With Limited Liability having complied with the requirements of the Companies Act No. 7 of 2007. Given under my hand at Colombo, on this Fifteenth day of August Two Thousand Nineteen

signed

D.N.R SIRIWARDENA
සමාගම් රෙජිස්ට්‍රාර් ජනරාල්
கம்பனிகள் பதிவாளர் நாயகம்
Registrar General of Companies

NOTE
1.This Certificate is for a Private Company – Section 3 reed with Section 5(2)
2. The Provisions of Part II apply – Section 3(2)

(OCR by machine)

• • Business licence, translated:

20 models
FORM 2A

Democratic Socialist People’s Government of Sri Lanka
Democratic Socialist Republic of Sri Lanka
Democratic Socialist Republic of Sri Lanka

Company number   P   V    00214585

Companies Act No. 7 of 2007
Anti-Counterfeit Companies Act 2007
The Companies Act No 7 of 2007

Private Company Incorporation Certificate Private Company Incorporation Certificate
Certificate of Incorporation of a Private Company
5 日 960 895 Lag, Pursuant to Section 5.

Magic Bits (Pvt) L TD

I hereby certify that the requirements under the Companies Act No. 7 of 2007 have been met and that the said company is incorporated today as a private company and is limited. Signed at Colombo this fifteenth day of August, two thousand and ten.

MAGICBITS (PVT) LTD

All the requirements under the Digital Wools Act have been complied with
of 2007
If I say that it has been incorporated as a private company on the date and the company has been addressed
I certify.
Given under my hand this fifteenth day of August in the year two thousand and nineteen.

I hereby certify that

MAGICBITS (PVT) LTD

On this day has been incorporated as a Private Company With Limited Liability having complied with the
requirements of the Companies Act No. 7 of 2007.
Given under my hand at Colombo, on this Fifteenth day of August Two Thousand Nineteen

Signed

D.N.R SIRIWARDENA
Registrar General of Companies
Registrar General of Companies

NOTE
1. This Certificate is for a Private Company Section/ 3 reed with Section 5(2)
2. The Provisions of Part II apply—Section 3(2)

(machine translated)

User guide

We need to tell the users that many variations of this product could have the same or similar internal controller specifications. We limit this description to only the version as imported by Junior IOT.

Description. The Junior IOT …  which is compact, safe, simple and comfortable to work with.

The Junior IOT … is recognized as the …, featuring a LCD display, a knob … and a connection point for the standard power supply.

Please be aware that in other versions exist. …  is not included in our information.

Settings and starting. …

Additional settings.

Preparing the …

 

Usage.

 

Safety.

Conclusion. Our Junior IOT Magicbit products are easy and safe to use. This makes these products a perfect fit to introduce pupils into the world of programming in any school and workshop environment. We have added the Junior IOT name to confirm our approval and support while ensuring compliance with EU regulations.